GILD design Solid bumper for iPhone 16

Home/Products/Solid bumper for iPhone 16


Smooth Our pursuit of usability

Experimenting over and over again we designed this bumper is to have no uncomfortable feeling between the bumper and the finger.It is also possible to use the swipe smoothly.

To accommodate the USB-C port introduced in the iPhone 16 Series, we have significantly enlarged the port opening to 7mm vertically (with a 3.5mm radius corner) and 16mm horizontally. This allows for the use of a wide variety of cables. (For iPhone 16 only, the vertical size is 6.5mm with a 3.25mm radius corner)	The interior dimensions of the screen opening have been widened, enabling compatibility with many commercially available screen protectors. [Bumper screen protector mounting areas' inner dimensions] ●iPhone 16 bumper: 68.1mm x 144.2mm ●iPhone 16 Pro bumper: 67.7mm x 145.8mm ●iPhone 16 Plus bumper: 73.4mm x 156.4mm ●iPhone 16 Pro Max bumper: 73.5mm x 159.2mm


We offer an optional Duralumin lens guard bar. Choose the level of protection that best suits your needs. When placed on a flat surface, the lens will not come into contact with the surface. (Customers who already own a lens guard bar for the iPhone 15 can reuse it)

We offer an optional Duralumin lens guard. It provides excellent protection for your valuable lens. The design is carefully crafted to avoid interfering with the LiDAR sensor, flash, and other functions. The double-sided tape used to attach the lens guard is a strong, adhesive tape manufactured by Nitto Denko. It leaves minimal residue upon removal, ensuring that your iPhone remains clean.	The case is fully compatible with Apple's original MagSafe charger and many other third-party MagSafe accessories. There is no interference with the attachment of these accessories to the iPhone. (The mount shown in the image is a cardholder manufactured by MOFT) [Rear opening interior dimensions] ●iPhone 16: 142.5mm x 65mm ●iPhone 16 Pro: 145.5mm x 66mm ●iPhone 16 Plus: 154.8mm x 71.5mm ●iPhone 16 Pro Max: 158mm x 7mm

Our iPhone cases also come equipped with a strap hole. The strap is connected on the bottom left of the phone, so it will not interfere with the mouthpiece during phone conversations. The cases can also be easily stored in your pocket.	We offer an optional Duralumin strap-compatible guard bar. It is designed to accommodate a strap, making it ideal for use in situations where the phone needs to be secured, such as when fishing on a boat. (Both the lens guard bar and the strap-compatible guard bar can be attached to the top or bottom)

Rubber o rings are attached to prevent the screws from losing.	The separately sold color bolt set (model number: GI-305) can also be used for the iPhone 16 series cases, as the bolt size is the same. ※Please note that if you use the aluminum shim to avoid lens contact, the length of the bolts will not be sufficient, and therefore, it cannot be used.

Regarding the Qi wireless charge
	It is possible to charge with a Qi wireless charger while using a Solid bumper case (*1) It will not charge when using a Solid case or an aluminum back panel. ( Please charge with the genuine lighting cable attached with the iPhone)


Regarding the WIFI、4G、5G、MagSafe、Bluetooth、GPS、NFC etc. (When an aluminum panel is attached the conditions are the same as the Solid case. )

Face ID	→	There are no problems while using face recognition and unlocking.
Apple Pay	→	There are no problem using wifi for both Solid bumper and Solid case. *2
Wifi	→	There are no problem using wifi for both Solid bumper and Solid case. *2
5G	→	There are no problem using 4G for both Solid bumper and Solid case. *2
4G	→	There are no problem using 4G for both Solid bumper and Solid case. *2
Bluetooth	→	There are no problem using Bluetooth for both Solid bumper and Solid case. *2
GPS	→	There are no problem using GPS for both Solid bumper and Solid case. *2
Magsafe	→	There are no problem using GPS for both Solid bumper and Solid case. *2

*1 Using the Qi wireless charger while the case is attached has the possibilities to lower
the charge efficiency due to the 1.5mm thickness of the case that makes a gap between
the wireless charger and the iPhone. Also, there will be a difference on
the charging time depending on the output wattage and the voltage of the adapter the Qi wireless charger.

*2 This product is made of Duralumin, which interrupts the signal from the back of the iPhone.
It is possible that might lower the phone reception.
Using the case in places with a poor reception in the first place can lower the reception of the signal even more. However, there are no problems in places with a good reception.

Color variations


Silver	Black

Red	Blue Marine
【Size,Weight】 11×77×153mm / 19g 【Included】 Solid bumper 1set、 Screw 5 pieces(Includes one spare) Shock absorber 10pieces(Includes two spare)、 Oring 5 pieces(Includes one spare) 【Lens Anti-Touch Kit】 (Packed separately) 7.5-mm Torx screw x 3 pieces (including 1 spare) 2-mm aluminum shim x 3 pieces (including 1 spare) 1-mm aluminum shim x 3 pieces (including 1 spare)

Please place your order after reading and agreeing with the notes below.
■Due to a tremendous amount of orders it might take 1 to 2 months before we ship the item. ■Your order will be shipped as soon as the product is made.

Lens guard for iPhone 16 / 16 Plus

It provides excellent protection for your valuable lens. The design is carefully crafted to avoid interfering with the LiDAR sensor, flash, and other functions. The double-sided tape used to attach the lens guard is a strong, adhesive tape manufactured by Nitto Denko. It leaves minimal residue upon removal, ensuring that your iPhone remains clean.

Lens guard【Oval】for 16 / 16 Plus
Color:Silver(GL-552)

Lens guard【Oval】for 16 / 16 Plus
Color:Black(GL-553)

Lens Guard Bar for iPhone 16 series

This lens guard bar is designed for the iPhone 16/16 Pro/16 Plus/16 Pro Max, which have a protruding camera lens. It prevents the lens from coming into contact with surfaces when the phone is placed face down. - All lens guards are existing products and can be used with the iPhone 15 Series.

Lens guard Bar for iPhone 16/16 Pro
(Color:Silver,Black)

Strap-compatible guard bar for iPhone 16/16 Pro
We offer an optional Duralumin strap-compatible guard bar. It is designed to accommodate a strap, making it ideal for use in situations where the phone needs to be secured, such as when fishing on a boat. (Both the lens guard bar and the strap-compatible guard bar can be attached to the top or bottom)

Strap-compatible guard bar for iPhone 16/16 Pro
Color:Silver(GL-547),Black(GL-548)

Screen protectors for the iPhone 16 series

The interior dimensions of the screen protector mounting area for the
GILD design iPhone 16 series bumpers are as follows:

● iPhone 16 bumper: 68.1mm x 144.2mm
● iPhone 16 Pro bumper: 67.7mm x 145.8mm
● iPhone 16 Plus bumper: 73.4mm x 156.4mm
● iPhone 16 Pro Max bumper: 73.5mm x 159.2mm

We have widened the interior dimensions compared to our previous bumpers
to accommodate a wider range of commercially available screen protectors.
You can use any screen protector that is smaller than these dimensions.

(Note)
The screen protectors we recommend are as follows:

Glass Zamurai Tempered Glass Film for iPhone 16

Product no：43544
Product code：GZ-IP1601KT-1
Price：1,982yen
Size：0.59×65.9×141.9mm

[Note] - While most screen protectors will fit within these dimensions,
we cannot guarantee compatibility for all screen protectors
due to variations in shape and design.
Although a camera lens protector is included,
it cannot be used in conjunction with our lens guard.

Aluminum color screw set

※If you choose to use aluminum shims to avoid touching the lens,
the color bolts cannot be used as they are not long enough.

Please place your order after reading and agreeing with the notes below.
■Due to a tremendous amount of orders it might take 1 to 2 months before we ship the item. ■Your order will be shipped as soon as the product is made.

Regarding postage
*For EMS If the total value of your order is 11,999 yen or less, you will be charged 3,000 yen for shipping. If the total value of your order is 12,000 yen or more, you will be charged 2,000 yen for shipping. Please be sure to add your phone number on PayPal when using EMS. We cannot process the shipping if this information is not included on the invoice.

Please place your order after reading and agreeing with the notes below.
Please read carefully the following before making an order. We will send a notification regarding the date of delivery individually by email. The shipment will be in the order as we received them. However, Order colors, and mixed color cases will take time to prepare, this might change the shipping order. Before making an order please be sure to set your mail to receive messages from info@gilddesign.com. When the order is complete an auto reply message will be send to you. If you cannot receive the message, please contact info@gilddesign.com after setting the domain.

Warning

・Please understand that we are not responsible for any breakage, or damage that may be caused by actions that were not suggested in this instruction.

・This product is made of Duralumin, which interrupts the signal from the back of the iPhone. It is possible that might lower the phone reception.

・This product is anodized. There are two dots that were not anodized on the inside of the case. These are the electrical connection places that will not catch the color during the anodizing process, and it is not a defect.

・This product is designed for iPhone 16.

・This product is not made to protect the iPhone 16 completely from all kinds of damage. Please notice that we will not be responsible for any breakage, loss, damage, or data loss of the iPhone.

・By using silicone shock absorber sheets, our product is designed to prevent the iPhone and the aluminum case from touching each other, and it is not designed to protect the iPhone from all damage.

・Please be aware that our company will not be responsible for any scratches on your iPhone when using the case.

・We might make changes on the case functions, appearance, or package contents without giving a notice.

・This case is made of aluminum. Please be careful on the sharp edges when installing the case.

・After putting the wrench firmly into the screw, please fasten it with the right amount of force to prevent the screw from breaking.

・Please note that as the characteristics of anodizing, it is difficult to produce the same color. There are possibilities that color differs from the image due to the production lot.

※iPhone.iPad are trademarks of Apple Inc.
※The trademark'iPhone'is used with a license from Aiphone K.K.